Specifications

Product Technical Specification & Customer Design Guidelines
18 Proprietary and Confidential - Specifications subject to change 2400058
Supplementary
services
b
• Call Barring
• Call Forwarding
• Call Hold
• Caller ID
• Call Waiting
• Multi-party service
• USSD
GPS
c
Provides:
• Standalone GPS functionality
• gpsOneXTRA
™
• A-GPS features
• NMEA support
Note: GPS specifications are preliminary targets that are subject to change without
notice. Actual GPS functionality is dependent on the firmware version, and on
module configuration.
Network
selection
• Network selection procedures described in 3G 22.011, R5 (June 2005),
3G 23.122 (June 2005), and 3G 43.022, R4
• RRC connection reject message to redirect from a 3G system to a 2G system,
according to 25.331, R5 (June 2004)
• A CPHS Customer Service Profile-like feature [PLMN Mode bit] on a USIM /
SIM that hides network selection related menus
• Initial HPLMN scan at two minutes after power on
• An HPLMN rescan irrespective of the serving MCC
• Selective disabling of any 2G or 3G frequency band
• Equivalent PLMN
• Network selection generally within 30 seconds of power up
• Enhanced network selection (ENS)
RF • Quad-band GSM/GPRS/EDGE (850 MHz, 900 MHz, 1800 MHz, 1900 MHz)
• Dual-band UMTS WCDMA FDD
· SL8080/SL8081: 850 MHz, 1900 MHz
· SL8082/SL8083: 900 MHz, 2100 MHz
· SL8084/SL8085: 850 MHz, 2100 MHz
• GPS (1575.42 MHz) (SL8080/82/84 only)
Environmental Operating temperature ranges
• Normal use (3GPP compliant): -20C to +65C
• Industry extended temperature range (non-3GPP compliant): TBD
Table 1-2: Modem features (Continued)