Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
96 Proprietary and Confidential 2130616
Command reference
Table 5-2: Test command details
Command Description
!ALLUP
Supporting chipsets:
• MDM9600
Note: The modem must be in
FTM mode to use this
command—use
!DAFTMACT
to enter FTM mode.
Turn transmitter on/off and simulate ‘All UPs’
This command turns the transmitter on/off and simulates an ‘All UPs’ Tx condition.
Usage:
• Execution: AT!ALLUP=<value>
Response:
OK
Purpose: Turn transmitter on/off and simulate All UPs Tx condition.
Parameters:
<value> (State of All UPs simulation)
• 0—All UPs off
• 1—All UPs on