Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference

94 Proprietary and Confidential 2130616

Command summary

The table below lists the commands described in this chapter.

Table 5-1: Test commands

Command Description Page

!ALLUP Turn transmitter on/off and simulate ‘All UPs’ 96

!BEP Return MT RSSI and RSQ 97

!CHAN Tune synthesizer to channel/band 98

!DAAGCTON Return C/N (carrier to noise ratio) while in factory test mode 98

!DAFTMACT Put modem into Factory Test Mode 99

!DAFTMDEACT Put modem into online mode from Factory Test Mode 99

!DAGGAVGRSSI Return averaged RSSI value in dBm (GSM only) 99

!DAGGRSSI Return the RSSI value in dBm (GSM only) 100

!DAGGRSSIRAW Return raw RSSI value 100

!DAGINFO Return GSM mode RF information (GSM only) 101

!DAGSLOCK Return synthesizer lock state 101

!DAGSRXBURST Set GSM receiver to burst mode 102

!DAGSRXCONT Set GSM receiver continuously on 102

!DAGSTXBURST Set GSM transmitter to burst mode 103

!DAGSTXFRAME Set GSM Tx frame structure 104

!DALGAVGAGC Return averaged Rx AGC value (LTE only) 105

!DALGRXAGC Return Rx AGC value (LTE only) 106

!DALSRXBW Set LTE Rx bandwidth (LTE only) 108

!DALSTXBW Set LTE Tx bandwidth (LTE only) 109

!DALGTXAGC Return Tx AGC value and transmitter parameters (LTE only) 107

!DAOFFLINE Place modem offline 109

!DASBAND Set frequency band 110

!DASCHAN Set modem channel (frequency) 111

!DASLNAGAIN Set LNA gain state 112

!DASPDM Set PDM value 113

!DASTXOFF Turn Tx PA off 113

!DASTXON Turn Tx PA on 114

!DAWGAVGAGC Return averaged Rx AGC value (WCDMA only) 114