Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
76 Proprietary and Confidential 2130616
!SIMRFSC
Supporting chipsets:
• MSM6290 (min f/w rev:
K2_0_7_52)
Set/report SIM refresh reset notification state
Set or report the state of the unsolicited SIM refresh reset notification (!SIMRFSN).
Note: This command should be used instead of !SIMRSTC, which has been depre-
cated.
Usage:
• Execution: AT!SIMRFSC=<n>
Response:
OK
Purpose: Enable/disable the SIM refresh reset notification.
• Query: AT!SIMRFSC?
Response: !SIMRFSC:
<n>
Purpose: Show the current state of the SIM refresh reset notification.
• Query list: AT!SIMRFSC=?
Purpose: Display valid execution format and parameter values.
• Unsolicited notification:
!SIMRFSN: <event>
Purpose: Alert host when the SIM is refreshed via a proactive REFRESH
command.
Parameters:
<n> (Notification state)
• 0=Disable
• 1=Enable
<event> (Notification event type)
• 0=SIM is usable and full service can start. For example, this event would occur
after a proactive REFRESH command.
• 1=Warm reset has been performed as a result of a REFRESH with RESET
command, which implicitly asks for the PIN verification procedure again.
Note: “!SIMFRSN: 1” is equivalent to the “!SIMRSTN” notification associated with
!SIMRSTC.
Note: For an explanation of the REFRESH command, see ETSI TS 101 223,
section 6.4.7.
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description