Specifications

Modem Status, Customization, and Reset Commands
Rev. 8 May.12 Proprietary and Confidential 75
!SELACQ
Supporting chipsets:
• MDM8220 (min f/w rev:
N2.0 Release 5)
• MDM9200
• MDM9600
Select RAT acquisition order
Select the acquisition order for RATs (Radio Access Technologies).
Usage:
• Execution: AT!SELACQ=<mode1>[,<mode2>[,<mode3>[,<mode4>[,<mode5>]]]]
Response:
OK
Purpose: Indicate the acquisition order for up to five RATs. See <mode>
parameter description for details.
• Query: AT!SELACQ?
Response:
<mode1>
<mode2>
<mode3>
<mode4>
<mode5>
Purpose: Show the current acquisition order for the supported RATs.
• Query list: AT!SELACQ=?
Purpose: Display valid execution format and parameter values.
Parameters:
<moden> (RAT types)
• Valid values (shown in default order):
• “CDMA”
• “LTE”
• “WCDMA”
• “HDR”
• “GSM”
• If the execution format is issued with fewer than five RATs, the missing entries
are appended based on the default order shown above.
• Example: If the command is issued as AT!SELACQ=HDR,CDMA,GSM
Then AT!SELACQ? will show:
HDR
CDMA
GSM
LTE
WCDMA
Note: Even if the device does not support a specific RAT (for example, CDMA), the
RAT will still appear in the Query response.
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description