Specifications

Modem Status, Customization, and Reset Commands
Rev. 8 May.12 Proprietary and Confidential 69
!PCTEMPLIMITS
Supporting chipsets:
• All
Set/report temperature state limit values
Certain modem functionality is affected by the modem’s temperature state. The possible
temperature states are high critical, high warning, high normal, low normal, and low
critical.
Use this command to report or set the limits that correspond to these temperature
states.
To display the current temperature and temperature state, see AT!PCTEMP in UMTS
Modems Supported AT Command Reference, Document 2130617.
Usage:
• Execution: AT!PCTEMPLIMITS=<hc>,<hw>,<hn>,<ln>,<lc>
Response:
OK
Purpose: Set the temperature limits for each state (all five values must be
specified).
• Query: AT!PCTEMPLIMITS?
Response:
HI CRIT: <hc>
HI WARN: <hw>
HI NORM: <hn>
LO NORM: <ln>
LO CRIT: <lc>
Purpose: Return the temperature limits for each state.
Parameters:
<hc> (High Critical)
• Temperature limit varies by device (see device Product Specification Document
or Product Technical Specification)
<hw> (High Warning)
• Temperature limit varies by device (see device Product Specification Document
or Product Technical Specification)
<hn>(High Normal)
• Temperature limit varies by device (see device Product Specification Document
or Product Technical Specification)
<ln> (Low Normal)
• Temperature limit varies by device (see device Product Specification Document
or Product Technical Specification)
<lc> (Low Critical)
• Temperature limit varies by device (see device Product Specification Document
or Product Technical Specification)
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description