Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
52 Proprietary and Confidential 2130616
!EDAEN
Supporting chipsets:
• All
Note: Only the execution
operation (“=”) is password-
protected.
Configure protocol stack for EDA
Enable or disable EDA (Extended Dynamic Allocation) functionality in the stack.
Note: This command is only supported on devices that support EDA.
Usage:
• Execution: AT!EDAEN=<enableFlag>
Response:
OK
Purpose: Enable or disable EDA.
• Query: AT!EDAEN?
Response:
!EDAEN:
<enableFlag>
OK
Purpose: Display the current <enableFlag> setting—this shows whether EDA is
enabled or disabled. If ERROR is returned, assume that EDA is
enabled.
• Query list: AT!EDAEN=?
Purpose: Return a list of valid <enableFlag> values.
Parameters:
<enableFlag> (Enable/disable EDA)
• 0 = Disable
• 1 = Enable (Default) — This value is used for normal operations.
!EQEN
Supporting chipsets:
• All
Note: Only the execution
operation (“=”) is password-
protected.
Enable/disable WCDMA L1 equalizer
Enable or disable the modem’s WCDMA L1 equalizer.
Usage:
• Execution: AT!EQEN=<enableFlag>
Response:
OK
Purpose: Enable/disable the L1 equalizer.
• Query: AT!EQEN?
Response:
!EQEN:
<enableFlag>
OK
Purpose: Return the current <enableFlag> value.
• Query List: AT!EQEN=?
Purpose: Return a list of supported <enableFlag> values.
Parameters:
<enableFlag> (Enable/disable L1 equalizer)
• 0 = Disable
• 1 = Enable (Default)
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description