Specifications

Modem Status, Customization, and Reset Commands
Rev. 8 May.12 Proprietary and Confidential 45
!CUSTOM
(continued)
Set/query customization settings (continued)
• “SKUID”—(Deprecated: Use !PRIID instead of this customization) Assign a
unique SKU ID to the modem.
<value>:
• Valid range: 0–255
• “STARTLPM”—Enable/disable LPM (Low Power Mode) as the startup mode for
the user equipment.
<value>:
• 0 = Disabled
• 1 = Enabled (start UE in LPM)
• “STKUIEN”—Enable/disable SIM toolkit UI.
• MDM9200 (while in QMI mode) (f/w rev: SWI9200X_3.0-Release2,
SWI9200M_3.5-Beta3)
<value>:
• 0, 1 = Enable for QMI interface
• 2 = Enable for AT interface
• All other chipsets (including MDM9200 not in QMI mode):
<value>:
• 0 = Disable
• 1 = Enable for CnS interface (AT disabled)
• 2 = Enable for AT interface (CnS disabled)
• "TRUFLOWDISABLE”—Enable/disable TRU-Flow
<value>:
• 0 = TRU-Flow is enabled (default)
• 1 = TRU-Flow is disabled
• “USBDMDISABLE”—Enable/disable the USB DM port.
<value>:
• 0 = Enable (default)
• 1 = Disable
• “USBSERIALENABLE”—Use IMEI as USB serial number.
<value>:
• 0 = Do not use IMEI as USB serial number (default)
• 1 = Use IMEI as USB serial number
• “WAKEHOSTEN”—Enable/disable host wake-up via SMS or incoming data
packet.
<value>:
• 0 = Disable (Host will not wake when SMS or incoming data packet is
received)
• 1 = Wake host when simple SMS is received.
• 2 = Wake host when incoming data packet is received.
• “WAPPUSHDATA”—Enable/disable processing of WAP Push data.
<value>:
• 0 = Disable
• 1 = Enable
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description