Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
42 Proprietary and Confidential 2130616
!CUSTOM
(continued)
Set/query customization settings (continued)
• “GPSSEL”—Select GPS antenna (useful only for devices with both a GPS and a
shared GPS/Rx diversity antenna).
<value>:
• 0 = Use dedicated GPS antenna (Default)
• 1 = Use shared GPS/Rx diversity antenna
• 2 = Use dedicated GPS antenna, with bias voltage disabled
• “GPSSUPLSETID”—Value used in the SUPL POS INIT message’s SET ID field
(Note: Not supported by MDM9200)
<value>:
• 0 = IMSI (Default)
• 1 = MSISDN
• “HPPLMNSCDIS”—Set HPLMN scan constraints.
<value>:
• 0 = Include foreign MCC
• 1 = Reject foreign MCC
• “HSDPATEST“—Enable/disable HSDPA test channel interface.
<value>:
• 0 = Disable
• 1 = Enable
• “HSICON”—Control HSPA icon behavior.
<value>:
• 0 = Maintain HSPA icon if the bearer is revoked but remains on the same cell
• 1 = Revert to the UMTS icon if the bearer is revoked
• “HWCFGLOCK”—Prevent UART reconfiguration.
<value>:
• 0 = Disable (UART cannot be reconfigured)
• 1 = Enable (UART can be reconfigured)
• “ISVOICEN”—Enable/disable voice functionality.
<value>:
• 0 = Disable voice-related CnS objects
• 1 = Enable voice-related CnS objects
• 2 = Disable voice on both CnS and AT interfaces
• (Note: Voice functionality is available on the AT interface when <value> = 0
or 1.)
• “MEPCODE”—Enable/disable prompt for MEP code when incorrect SIM is
inserted.
<value>:
• 0 = Disable
• 1 = Enable
(Continued on next page)
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description