Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
36 Proprietary and Confidential 2130616
!BPLMNTIMER
Supporting chipsets:
• All
Set/return data inactivity timer value
Set or return the GPRS data inactivity timer ‘expiry’ value.
The timer represents the time elapsed since the last time there was PS data traffic – the
timer resets to zero each time PS data traffic is received.
After the timer expires, a background PLMN scan to find a home or more-preferred
PLMN network occurs (note that while the scan is in progress, data traffic is blocked).
Usage:
• Execution: AT!BPLMNTIMER=<timer>
Result:
OK
Purpose: Set the inactivity timer.
• Query: AT!BPLMNTIMER?
Response:
!BPLMNTIMER:
Recent Activity Timer (s): <timer>
OK
or !BPLMNTIMER:
Recent Activity Timer is not set, default is used
OK
Purpose: Display the current <timer> setting.
Parameters:
<timer> (Data inactivity timer, in seconds)
• Valid range: 0–65535
• Default: 45
!BSHWID
Supporting chipsets:
• All, with these exceptions:
• MDM8200 (min f/w rev:
M2.0 Release 1)
• MSM6290 (min f/w rev:
K1_1_1_10ap or
K2_0_3_1ap)
Note: This command is not
password-protected.
Return modem hardware ID
Return the modem’s hardware ID number.
Usage:
• Query: AT!BSHWID?
Response:
<HW ID value>
OK
Purpose: Return the modem’s <HW ID value>.
Parameters:
<HW ID value> (Modem’s hardware ID)
• Valid range: 0–63
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description