Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
34 Proprietary and Confidential 2130616
!BAND
Supporting chipsets:
• MDM6200
• MDM6270
• MDM8220
• MDM9200
• MDM9600
• QSC6270
Note: The ‘Basic’ command
and response versions are
used if you haven’t entered the
required password. (See
Command access on
page 14.)
Note: The ‘Basic’ commands
and responses are also
described in the AirCard/
AirPrime Supported AT
Command Reference.
Select/return frequency band set
Configure the modem to operate on a set of frequency bands, look up available sets,
create new sets, or return the current selection.
Usage:
• Execution (Basic):
AT!BAND=<Index>
Response: OK
Purpose: Select an existing set of bands.
• Execution (Extended):
AT!BAND=<Index>,”<Name>”,<GWmask>[,<Lmask>]
Response:
OK
Purpose: Create a new set of bands.
• Query: AT!BAND?
Response:
Index, Name[, GW Band Mask [, L Band Mask]]
<Index>, <Name>[, <GWmask> [, <Lmask>]]
OK
or (If the current band mask doesn’t match a band set)
Unknown band mask. Use AT!BAND to set band.
<Index>
OK
Purpose: Report the current band selection. (<GWmask> and <Lmask> may
only appear in Extended responses.)
• Query List: AT!BAND=?
Response:
Index, Name[, GW Band Mask [ L Band Mask]]
<Index1>, <Name1>[, <GWmask1> [, <Lmask1>]]
...
<IndexN>, <NameN>[, <GWmaskN> [, <LmaskN>]]
OK
Purpose: Display allowed <Index> values and descriptions of the associated
band sets.
(Continued on next page)
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description