Specifications

Rev. 8 May.12 Proprietary and Confidential 29

3: Modem Status, Customization, and Reset

Commands

Introduction

This chapter describes commands used to reset the modem, adjust

customization settings, retrieve the hardware version, and monitor

the temperature, voltage, and modem status.

Command summary

Table 3 -1 lists the commands described in this chapter.

Table 3-1: Modem status commands

Command Description Page

!AIN Read analog value from AUXV1 32

!ANTSEL Set/query external antenna select configuration 33

!BAND Select/return frequency band set 34

!BPLMNTIMER Set/return data inactivity timer value 36

!BSHWID Generate frequency on buzzer pin 38

!BSMCCHECK Return modem hardware version 37

!BZBUZZ Generate frequency on buzzer pin 38

!BZBUZZPLAY Generate melody on buzzer pin 39

!CMEN Enable/disable HSPA Compressed Mode stack functionality 39

!CUSTOM Set/return customization settings 40

!CWSETUP Set Connection Watchdog parameters 46

!CWSTATS Query/clear Connection Watchdog statistics 47

!DARPEN Enable/disable DARP for SAIC 47

!DIO Read/write from/to Digital I/O (DIO) channel 48

!DIOCFG Configure DIO channels 49

!DTMEN Enable/disable Dual Transfer Mode stack functionality 51

!EDAEN Configure protocol stack for EDA 52

!EQEN Enable/disable WCDMA L1 equalizer 52

!GCFEN Enable/disable GCF test mode 53

!GCFUIMTYPE Set/return current SIM type 53

!HSDCAT Set/return HSDPA category 54