Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
288 Proprietary and Confidential 2130616
call prioritization, +CPAS, 40
car kit audio profile, 129
CDMA
receive diversity, enable/disable, 87
+CFUN persistence, customization, 40
channel
digital. See DIO channel.
priority UMTS selection state, 91
set, 111
CHAP
PDP authentication, query/set, 89
circuit-switched call, select and configure profile, 151, 174
codec
controller, select, 178
mode, select, 167, 168
register bit width, set, 169
register, configure, 165, 166
registers, configure all required for reset, 166
registers, configure all required to make call, 165
Rx gain
audio profile default setting, 130, 130
query/set, 132
sidetone gain, query/set, 134
Tx gain
audio profile default setting, 130, 130
CODEC Tx gain, query/set, 135
command access password, 14
connection
PDP authentication requirements, query/set, 89
Connection Watchdog
parameters, setup, 46, 47
CS call intiation, enable/disable UE control, 40
customization
example, modules, 269
modem functions, 40
remove all customizations, 126
D
DARP, enable/disable for SAIC, 47
diagnostic
commands, list, 85
information, display, 87
digital audio interface, 127
digital I/O channel. See DIO channel.
DIO channel
configure, 49
read/write, 48
Distributed Shared Memory. See DSM buffer pools.
diversity, receive, enable/disable, 87, 90
DLCI
port mappings set/query, MUX mode, 58
DM
account authentication mode, 254
account credentials, 255
account, set, 256
client roaming option, 257
FOTA configuration, 252
FUMO node, DM Tree root path, 256
port, enable/disable, 45
profile IDs for data connections, 257
SDM response option, 253
service, map to UART, 58
session types, support for, 258
XML format, 254
DNS
negotiation, PDP context option, 74
document
format conventions, 25
Downlink Advanced Receiver Performance, enable/disable for
SAIC, 47
DSM buffer pools
memory usage, display, 121
DTM
enable/disable, 51
DTMF
gain
Tx, set/query, 137
responsible codec, 128
volume, set/query, 138
Dual Transfer Mode. See DTM.
DUN
PDP context option, 74
E
echo cancellation, 127
audio profile default setting, 129, 129, 130
query/set, 139, 168
EDA, enable/disable, 52
EDGE
MS class, NV memory item, 63
EFR vocoder, audio front end test, 132
Enhanced Full Rate vocoder, audio front end test, 132
equalizer, WCDMA L1, enable/disable, 52
error conditions, display log, 87
escape sequence guard time, 15
Extended Dynamic Allocation, enable/disable, 52
external PCM audio profile
auxiliary, 129
F
factory settings, reset WCDMA receiver, 117
factory test mode. See FTM.
FDN checking
customization, 41
Finite Impulse Response filtering, 128
FIR filtering, 128
firmware, upgrading, 15
flight mode. See Low Power Mode
format
documentation conventions, 25
frequency
band, set, 110
channel, set, 111
offset, display, GSM, 101