Specifications

Rev. 8 May.12 Proprietary and Confidential 287
Symbols
+++, 15
+CPAS
call prioritization, 40
A
A5 encryption support
MS class, NV memory item, 63
acoustic response, equalization, 128
ADC, read from AUXV1, 32
adjustable gain, responsible codec, 128
AGC
averaged Rx value (LTE mode), return, 105
averaged Rx value (WCDMA), return, 114
configuration, query/set, 145
read from first receiver, 123
read from secondreceiver, 123
read Rx AGC in dBm for CDMA and WCDMA
modes, 120, 122
Rx
audio profile default setting, 129, 129, 130
value, WCDMA mode, 116
Rx value (LTE), return, 106
Tx
audio profile default setting, 129, 129, 130
query/set, 154
value, WCDMA mode, 116
Tx value (LTE), return, 107
Tx, set desired value, 124
airplane mode. See Low Power Mode
AMR codec, enable/disable, 41
analog
audio interface, 127
read value from AUXV1, 32
antenna
select configuration, external, 33
ASCII table, 281
AT commands
access, password, 14
GPS command error codes, 208, 210
guard timing, escape sequence, 15
password commands, 27, 29
password protected, access, 28
password, changing, 28
service, map to UART, 58
Supported AT Command Reference, 13
timing, entry, 14
audio
codec
mode, select, 167, 168
default values, reset, 136
features, receive, 127
features, transmit, 127
filters, high-pass, 127
loopback, enable/disable, 132
pass band, 127
profile
activate, 130
AGC, Tx, query/set, 154
AGC/AVC configuration, query/set, 145
CODEC Rx gain, query/set, 132
CODEC Tx gain, query/set, 135
configure and activate
, 151, 174
DTMF Tx gain, query/set, 137
DTMF volume, query/set, 138
echo cancellation, query/set, 139, 168
microphone gain, query/set, 143
noise suppression, enable/disable, 144
sidetone gain, query/set, 134
voice volume levels (Rx), 150
volume, set for Tx, 158, 178
profiles
default settings, 129, 129, 130
profiles, overview, 128
volume, set/query, 138
automatic network mode, customization, 40
Automatic Volume Control. See AVC.
auxiliary audio profile, 129
AUXV1, read ADC value, 32
AVC
configuration, query/set, 145
Rx, audio profile default setting, 129, 129, 130
B
backup data, restore, 126
band
group, PRL scanning algorithm selection, 44
preferred, set, 88
set, 110
set current operating band, 88
bands
available, 34
current, 34
set, 34
bandwidth
LTE, set Rx, 108
LTE, set Tx, 109
baud rate
DCE, query/set, 89
buffer pools, DSM. See DSM buffer pools.
burst mode
GSM receiver enable/disable, 102
GSM transmitter enable/disable, 103
BUZZER
generate frequency on, 38
generate predefined melody, 39
C
calibration data, remove all, 126
Index