Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
266 Proprietary and Confidential 2130616
!THERMINFO
Supporting chipsets:
• MDM8200
• MDM8220 (min f/w rev:
N2.0 Release 6)
• MDM9200 (min f/w rev:
M1.0 Release 3,
X3.0 Beta 6)
Note: This command is not
password-protected.
Display thermal mitigation information
Display all thermal mitigation-related information. (This returns the same information
that is returned using the Query formats of the other thermal mitigation commands. See
those commands for parameter definitions.)
Usage:
• Execution: AT!THERMINFO
Response:
Mitigation threshold= xx (See !THERMTHRESHOLD on page 267)
Emergency threshold= xx
Hysteresis= xx
Basic loop(ms)= xxxx (See !THERMTIMERS on page 268)
Mitigation loop(ms)= xxxxx
T_down(ms)= xxxxx
Misc time(ms)= xxxxx
Pa_change_holdoff= xx
Delta Tx power(1/12 dB)= xx (MDM8200 only) (See !THERM-
DELTATX on page 264)
Delta Tx power(dB)= xx (MDM8220/MDM9200 only)
Max backoff (dB) = xx (MDM8220/MDM9200 only)
time for non-backoff value of power (ms) = xxxxx (MDM8220/
MDM9200 only)
time for backoff value of power (ms) =
xxxxx (MDM8220/
MDM9200 only)
timer for each step of backoff (ms) =
xxxxx (MDM8220/MDM9200
only)
Thermal mitigation version=1 (See !THERMENABLE on page 265)
Thermal mitigation enable (0-1) 1-Enabled (or 0-Disabled)
Thermal mitigation configuration: (See !THERMCONFIG on
page 263)
Adjust maximum Tx power (0-1) 1-Enabled (or 0-Disabled)
Disable Rx Diversity (0-1) 0-Disabled (or 1-Enabled)
Disable Q-ICE at mitigation state (0-1) 0-Disabled
DL RLC throttling control (0-1) 0-Disabled
(or 1-Enabled)
(MDM8220/MDM9200 only)
UL RLC throttling control (0-1) 0-Disabled
(or 1-Enabled)
(MDM8220/MDM9200 only)
Delta Tx power temp =
xx ( MDM8220/MDM9200 only)
OK
Purpose: Display all thermal mitigation-related information.
Parameters:
See the Parameter sections for the thermal mitigation commands referenced in the
Response format.
Table 13-2: Thermal mitigation command details (Continued)
Command Description