Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
250 Proprietary and Confidential 2130616
!PADSETUP (continued)
Set/query PAD (Packet Assembler/Disassembler) profile
connection parameters (continued)
<remoteport> (Remote client port number)
• 1–65535—Port number of remote client (in client mode only). Parameter is
ignored in server mode.
<autostart> (State of auto-start feature)
• 0=Disabled (Default)
• 1=Enabled
<connprofile> (Connection profile ID)
• Valid range: 1–16
• Default: 1 if not specified
!PADSWITCH
Supporting chipsets:
• MDM6200: (min f/w rev:
P1_0_0_0)
• MDM6270 (min f/w rev:
S2.0.0.10)
• QSC6270 (min f/w rev:
S2.0.0.10)
Note: This command is not
password-protected.
Switch active PAD session
Switch the active PAD session to another session (uniquely identified by the
combination of <PADprofile> and <session>).
After switching sessions, ATO can be used to enter PAD mode and then send and
receive data for the active session, or to query available PAD sessions.
Usage:
• Execution: AT!PADSWITCH=<PADprofile>,<session>
Response:
OK
or ERROR
Purpose: Switch the active PAD session to the PAD session uniquely identified
by <PADprofile> and <session>.
• Query: AT!PADSWITCH?<qualifier>
Response:
!PADSWITCH: Active session: <PADprofile>, <session>
!PADSWITCH:
<padprofile>,<session>,<dst_ip>,<dst_port>,<unread>
[...]
(repeats for each available PAD session]
OK
Purpose: Show the active session (1st line of response) and all other available
sessions (lines 2–n).
Parameters:
<PADprofile> (PAD profile ID number)
• Valid range: 1–10
<session> (Session index)
• Valid range: 0–3
<dst_ip> (Destination port address)
• Standard IP address format. For example:
• IPv4: 63.162.134.132.
• (MDM6200 only, min f/w rev: P1_0_0_8)
IPv6: 1234:5678:9012:3456:7890:1234:5678:9012
<dst_port> (Destination port)
• Valid range: 0–65535
<unread> (Unread data flag)
• 0=No unread data
• 1=Unread data available
Table 11-2: PAD command details (Continued)
Command Description