Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
246 Proprietary and Confidential 2130616
!PADDISCONN
Supporting chipsets:
• MDM6200
• MDM6270 (min f/w rev:
S2.0)
• MSM6290 (min f/w rev:
K2.0 Release 2)
• QSC6270 (min f/w rev:
S2.0)
Note: This command is not
password-protected.
Disconnect PAD connection
Disconnect the currently active PAD (Packet Assembler/Disassembler) session.
Note: This command is equivalent to using ATH .
Usage:
• Execution: AT!PADDISCONN [=<PADprofile>,<session>]
Response (multipad not supported):
DISCONNECT PAD
or OK
Response (multipad supported):
If PAD session has been disconnected (DCD line is deasserted as per AT&C
setting):
OK
DISCONNECT PAD: <PADprofile>,<connectionState>
or
If data connection is already disconnected:
OK
Purpose: Disconnect the currently active profile. For multipad, the
“DISCONNECT PAD” response appears after the session disconnects.
Parameters:
<PADprofile> (PAD profile ID number)
• Only used when multipad is supported.
• Valid range: 1–10
<session> (Session index)
• Only used when multipad is supported.
• Valid range: 0–3
!PADENDLISTEN
Supporting chipsets:
• MDM6200 (min f/w rev:
P1_0_0_0)
• MDM6270 (min f/w rev:
S2.0.0.10)
• QSC6270 (min f/w rev:
S2.0.0.10)
Note: This command is not
password-protected.
Disable PAD server
Disable a PAD server (and disconnect all PAD sessions related to the PAD server).
If remote clients were connected, the following notification will be received after the OK
response:
DISCONNECT PAD: <padprofile>, <session>
Usage:
• Execution: AT!PADENDLISTEN=<PADprofile>
Response:
OK
or ERROR
Purpose: Disable the indicated PAD server.
Parameters:
<PADprofile> (PAD profile ID number)
• Valid range: 1–10
<session> (Session index)
• Valid range: 0–3
Table 11-2: PAD command details (Continued)
Command Description