Specifications

Rev. 8 May.12 Proprietary and Confidential 243

11: PAD Commands

Introduction

This chapter describes commands used to configure, initiate, and

disconnect single- and multi-PAD (Packet Assembler/Disassembler)

client and server connections. For detailed descriptions of PAD

functionality, see EMConnect Guide (Document 2131177).

Managing PAD sessions

• Before initiating a PAD session, use !PADCONF, !PADSETUP,

and !PADFILTER to configure PAD profile settings.

• To initiate a PAD session, use !PADCONN (for a client

connection) or !PADLISTEN (for a server connection).

• To switch between active PAD sessions, use !PADSWITCH.

• To disconnect a PAD session, use !PADDISCONN.

• To stop a PAD server, use !PADENDLISTEN.

Command summary

The table below lists the commands described in this chapter.

Table 11-1: PAD commands

Command Description Page

!PADCONF Configure profile options 244

!PADCONN Initiate PAD client connection 245

!PADDISCONN Disconnect PAD connection 246

!PADENDLISTEN Disable PAD server 246

!PADFILTER Set IP address filters for TCP PAD server 247

!PADLISTEN Initiate PAD server connection 248

!PADSETUP Set/query PAD (Packet Assembler/Disassembler) profile

connection parameters

249

!PADSWITCH Switch active PAD session 250