Specifications

STK Commands
Rev. 8 May.12 Proprietary and Confidential 225
Send SS (<cmdId=11>)
!STKCR parameters
<data> Not used
<result> Integer • 0—Command performed successfully
• 1—Command beyond ME’s capabilities
• 2—Currently busy on call
• 3—Currently busy with SS transaction
• 4—Terminated by user
• 5—SS returned Result Error Code
• 6—Network currently unable to process command
• 7—Call setup not accepted
• 8—User cleared down call before connection or
network release
Table 10-4: Setup Call parameters (Continued)
Parameter Format Description
Table 10-5: Send SS parameters
Parameter Format Description
!STKGC <data> parameter—Format:
<TON>, <NPI>, <address>, [<DCS>,] <alphaId>, <iconId>, <dispMode>
<TON> Integer Type of number
• 0—Unknown
• 1—International
• 2—National
• 3—Network specific
<NPI> Integer Numbering plan identifier
• 0—Unknown
• 1—ISDN telephony
• 3—Data
• 4—Telex
• 9—Private
<address> Hex string SS address
<DCS> Integer
Note: Only returned if AT!STKVER? returns 1.
Data coding scheme for <alphaId>
• 0—7-bit GSM default alphabet (packed)
• 4—8-bit GSM default alphabet (unpacked)
• 8—UCS2 alphabet
<alphaId> Hex string Alpha identifier for user confirmation