Specifications

STK Commands
Rev. 8 May.12 Proprietary and Confidential 223
STK command (<cmdId>) parameters
Set Up Event List (<cmdId=05>)
Set Up Call (<cmdId=10>)
Table 10-3: Setup Event List parameters
Parameter Format Description
!STKGC <data> parameter—Format:
<event>[<event>]
<event> Hex Supported event list
• 04—User activity
• 05—Idle screen available
• Examples:
• “05”
• “0405”
!STKCR parameters
<data> Not used
<result> Integer • 0—Command performed successfully
Table 10-4: Setup Call parameters
Parameter Format Description
!STKGC <data> parameter—Format:
<method>, <TON>, <NPI>, <address>, <subaddress>, <ccp>, [<DCS1>,]
<alphaId1>, <iconId>, <dispMode>, [<DCS2>,] <alphaId2>, <iconId>, <dispMode>,
<redial>, <timeout>
<method> Integer Call setup method
• 0—Only if there are no other calls
• 1—Put all other calls on hold
• 2—Disconnect all other calls
<TON> Integer Type of number
• 0—Unknown
• 1—International
• 2—National
• 3—Network specific
<NPI> Integer Numbering plan identifier
• 0—Unknown
• 1—ISDN telephony
• 3—Data
• 4—Telex
• 9—Private
<address> Hex string Dialing address