Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
220 Proprietary and Confidential 2130616
!STKPD
Supporting chipsets:
• All, with these exceptions:
• MSM6290 (min f/w rev:
K1_0_2_3ap)
Note: This command is not
password-protected.
Update STK supported features profile
Indicate to the SIM which STK features are supported by the host.
Note: The modem must be restarted before the new profile information takes effect.
(The modem downloads the profile to the SIM automatically each time it resets.)
Usage:
• Execution: AT!STKPD=<bitmask>
Response:
OK
or ERROR
Purpose: Store the new profile on the host. The profile will be downloaded the
next time the modem resets.
• Query: AT!STKPD?
Response:
Profile config=<bitmask>
OK
Purpose: Return the current profile <bitmask>.
• Query List: AT!STKPD=?
Purpose: Return the expected command format.
Parameters:
<bitmask> (Supported STK features)
• Format: Seven hexadecimal bytes
• Byte order: 07 06 05 04 03 02 01
• Bit order: 76543210
• Example:
• “0A000000000001”—“Number of character support across ME” = 10 and
“Menu selection support” = enabled. All other values are 0.
• In the ‘bit’ references below, the code in brackets—“(BXbY)”—refers to the bit
position in the terminal profile message defined in 3GPP TS 11.14, where “BX” =
byte X, and “bY” = bit Y.
• Byte 01:
• Bit 0: Menu selection support (B1b4)
• Bit 1: Support for alpha in call control (B2b5)
• Bit 2: UCS2 entry support (B2b6)
• Bit 3: UCS2 display support (B2b7)
• Bit 4: Display Text command support (B3b1)
• Bit 5: Get Inkey command support (B3b2)
• Bit 6: Get Input command support (B3b3)
• Bit 7: Play Tone command support (B3b5)
(Continued on next page)
Table 10-2: STK command details (Continued)
Command Description