Specifications

STK Commands
Rev. 8 May.12 Proprietary and Confidential 215
!STKCR
Supporting chipsets:
• All, with these exceptions:
• MSM6290 (min f/w rev:
K1_0_2_3ap)
Note: This command is not
password-protected.
Respond to unsolicited SIM command
Respond to the last received unsolicited SIM command, sending the results of the
command’s execution and any associated data (dependent on type of command
executed).
Note: No response is required for <cmdId = 81>.
Usage:
• Execution: AT!STKCR=<cmdId>, <result>[, <data>]
Response:
OK
or ERROR
Purpose: Send the result of the command that was just executed and any
associated data to the SIM.
• Query List: AT!STKCR=?
Purpose: Return the expected command format.
Parameters:
<cmdId> (The STK command identified by the last received unsolicited SIM command)
• Valid values (hexadecimal format):
• 05=Set up Event List command
• 10=Set up Call command
• 11=Send SS command
• 12=Send USSD command
• 13=Send SMS command
• 14=Send DTMF command
• 15=Launch Browser command
• 20=Play Tone command
• 21=Display Text command
• 22=Get Inkey command
• 23=Get Input command
• 24=Select Item command
• 25=Set Up menu command
• 28=Set Up Idle Mode Text command
• 35=Language Notification command
<result> (Result of host’s attempt to process the <cmdId>)
• Format is <cmdId>-dependent. See STK command (<cmdId>) parameters on
page 223 for details.
<data> (Information obtained when <cmdId> was processed on the host)
• Format is <cmdId>-dependent. See STK command (<cmdId>) parameters on
page 223 for details.
Table 10-2: STK command details (Continued)
Command Description