Specifications

GPS Commands
Rev. 8 May.12 Proprietary and Confidential 207
!GPSXTRATIMEENABLE
Supporting chipsets (GPS-
enabled devices only):
• MDM6200
• MDM8200A
• MDM8220
• MDM9200
• MDM9600
• MSM6290
• QSC6270 (min f/w rev: S2.0)
Set/report GPS XTRA time settings
Enable or disable GPS XTRA time information, and set or report specific GPS XTRA
time settings.
Note: !RESET must be issued after this command is used.
Usage:
• Execution: AT!GPSXTRATIMEENABLE=<enable> [,<thresh>, <delay>]
Response:
OK
or ERROR
Purpose: Enable or disable time information. If enabled, sets the uncertainty
threshold and delay time to retry with a backup server.
• Query: AT!GPSXTRATIMEENABLE?
Response:
XTRA Time Info Enabled: <enable>
XTRA Time Uncertainty Threshold: <thresh>
XTRA Time Delay Threshold: <delay>
Purpose: Return the current values of GPS XTRA time parameters.
• Query List: AT!GPSXTRATIMEENABLE=?
Purpose: Return supported execution parameter values.
Parameters:
<enable> (Enable or disable time information)
• 0=Disable. To fully disable gpsOneXTRA, you must also call
!GPSXTRADATAENABLE=0 to disable gpsOneXTRA data functionality.
• 1=Enable
<thresh> (XTRA time uncertainty threshold, in ms)
• Valid range: 100–30000
<delay> (Time to delay before retrying with backup server, in ms)
• Valid range: 100–10000
Table 9-2: GPS command details (Continued)
Command Description