Specifications

GPS Commands
Rev. 8 May.12 Proprietary and Confidential 203
!GPSXTRAAPN (continued)
Set GPS XTRA APNs (continued)
<APN> (Access Point Name)
• Character string, entered with quotation marks
• Examples: “mycompany.mnc987.mcc123.gprs”, “ourinternet”
!GPSXTRADATAENABLE
Supporting chipsets (GPS-
enabled devices only):
• MDM6200
• MDM8200A
• MDM8220
• MDM9200
• MDM9600
• MSM6290
• QSC6270 (min f/w rev: S2.0)
Set/report GPS XTRA settings
Enable or disable GPS XTRA data and set or report GPS XTRA data configuration
settings.
Note: These settings are persistent across power cycles.
Note: !RESET must be issued after this command is used.
Usage:
• Execution: AT!GPSXTRADATAENABLE=
<enable>[,<retries>,<retryInt>[,<dload>,<dloadInt>]]
Response:
OK
or ERROR
Purpose: Enable or disable GPS XTRA data. You can only set the retry
parameters if <enable> = 1, and you can only set the download
parameters if the retry parameters are set.
• Query: AT!GPSXTRADATAENABLE?
Response:
XTRA Data Enabled: <enable>
XTRA Data Retry Number: <retries>
XTRA Data Retry Interval: <retryInt>
XTRA Data Autodownload Enabled: <dload>
XTRA Data Autodownload Interval: <dloadInt>
Purpose: Return the current GPS XTRA data settings.
• Query List: AT!GPSXTRADATAENABLE=?
Purpose: Return supported <enable>, <retries>, <retryInt>, <dload>, and
<dloadInt> values.
Parameters:
<enable> (Enable or disable gpsOneXTRA functionality)
• 0=Disable. To fully disable gpsOneXTRA, you must also call
!GPSXTRATIMEENABLE=0 to disable gpsOneXTRA time functionality.
• 1=Enable
<retries> (Number of download retries)
• Valid range: 0–10
<retryInt> (Interval between download retries, in minutes)
• Valid range: 1–120
<dload> (Enable or disable automatic downloads)
• 0=Disable
• 1=Enable
<dloadInt> (Interval between automatic downloads, in hours)
• Valid range: 1–168
Table 9-2: GPS command details (Continued)
Command Description