Specifications

GPS Commands
Rev. 8 May.12 Proprietary and Confidential 195
!GPSPROTOSEL
Supporting chipsets (GPS-
enabled devices only):
• MSM6290
• (Deprecated)
QSC6270 (min f/w rev: S2.0)
Control GPS protocol selection
Set or report the current GPS protocol selection method for User Plane GPS.
Note: !RESET must be issued after this command is used.
Usage:
• Execution: AT!GPSPROTOSEL=<protocol>
Response:
OK
or ERROR
Purpose: Indicate the protocol selection method to use.
• Query: AT!GPSPROTOSEL?
Response:
Protocol selection: <protocol>
OK
Purpose: Return the current <protocol> selection method.
• Query List: AT!GPSPROTOSEL=?
Purpose: Return supported <protocol> values.
Parameters:
<protocol> (Protocol selection method)
• 0=None
• 1=PreSUPL
• 2=X1
• 3=SUPL (Secure User Plane Location)
Table 9-2: GPS command details (Continued)
Command Description