Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
194 Proprietary and Confidential 2130616
!GPSPOSMODE
Supporting chipsets (GPS-
enabled devices only):
• MDM6200
• MDM8200A
• MDM8220
• MDM9200
• MDM9600
• MSM6290
• QSC6270 (min f/w rev: S2.0)
Configure support for GPS positioning modes
Enable or disable support for several GPS positioning modes.
Note: !RESET must be issued after this command is used.
Usage:
• Execution: AT!GPSPOSMODE=<mask>
Response:
OK
or ERROR
Purpose: Use a single byte hexadecimal format mask to indicate which GPS
positioning modes are to be supported.
• Query: AT!GPSPOSMODE?
Response:
MASK: <mask>
OK
Purpose: Return a <mask> value indicating which GPS positioning modes
are currently supported.
• Query List: AT!GPSPOSMODE=?
Purpose: Return supported <mask> values.
Parameters:
<mask> (Bitmap value representing supported GPS positioning modes)
• 1-byte hex format mask (do not include ‘0x’ before the mask value)
• ‘On’ bits identify modes that are supported
• Bit 0: Standalone
• Bit 1: UP MS-based
• Bit 2: UP MS-assisted
• Bit 3: CP MS-based (2G)
• Bit 4: CP MS-assisted (2G)
• Bit 5: CP UE-based (3G)
• Bit 6: CP UE-assisted (3G)
• Bit 7: Unused
Example:
AT!GPSPOSMODE=2a enables support for Bit 5 (CP UE-based), Bit 3 (CP MS-
based), and Bit 1 (UP MS-based)
Table 9-2: GPS command details (Continued)
Command Description