Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
182 Proprietary and Confidential 2130616
!GPSAUTOSTART
Supporting chipsets (GPS-
enabled devices only):
• MDM6200
• MDM8200A
• MDM8220
• MDM9200
• MDM9600
• MSM6290 (min f/w rev:
K1_0_2_1ap, L1_0_2_1ap)
• QSC6270: (min f/w rev: S2.0)
Note: This command is not
password-protected.
Configure GPS auto-start features
Configure the GPS auto-start features. Any changes take effect the next time the
modem is reset.
Note: If auto-start is enabled, another GPS session cannot be started.
Usage:
• Execution: AT!GPSAUTOSTART=<enable>[, <fixtype>, <maxtime>,
<maxdist>, <fixrate>]
Response:
OK
or ERROR
Purpose: Assign start values for various GPS settings
• Query: AT!GPSAUTOSTART?
Response: !
GPSAUTOSTART
enable: <enable>
fixtype: <fixtype>
maxtime: <maxtime> seconds
maxdist: <maxdist> meters
fixrate: <fixrate> seconds
OK
Purpose: Display the current values for auto-start features
• Query List: AT!GPSAUTOSTART=?
Purpose: Return the expected command format.
Parameters:
<enable> (Enable/disable the feature)
• 0=Disabled
• 1=Enabled (GPS tracking session starts automatically when modem is reset)
<fixtype> (Type of fix to establish)
• 1=Standalone (not supported by a mobile station)
• 2=MS-based only
• 3=MS-assisted only
<maxtime> (Maximum time to wait for a position fix)
• Valid range: 0–255—Number of seconds to wait
<maxdist> (Requested accuracy of fix)
• Entered in decimal format
• Valid range:
• 0–4294967279 meters
• 4294967280=No preference
<fixrate> (Time to wait between fixes)
• Valid range: 1–65535 seconds
Table 9-2: GPS command details (Continued)
Command Description