Specifications

GPS Commands
Rev. 8 May.12 Proprietary and Confidential 181
Command reference
Table 9-2: GPS command details
Command Description
!GPS3RDPARTYXFER
Supporting chipsets (GPS-
enabled devices only):
• MDM6200
• MDM8200A
• MDM8220
• MDM9200
• MDM9600
• MSM6290
• QSC6270 (min f/w rev: S2.0)
Note: This command is not
password-protected.
Initiate Location Service (LCS) third party transfer location
request
Initiate a location fix, directing the location information to a third party at a specified
ISDN address.
Usage:
• Execution: AT!GPS3RDPARTYXFER=<External Client ID - ISDN address>[,
<MLC number - ISDN address>]
Response:
OK
or ERROR
Purpose: Initiate a location fix and send the information to the specified
address.
• Query List: AT!GPS3RDPARTYXFER=?
Purpose: Return the expected command format.
Parameters:
<External Client ID> (ISDN address to which fix information is to be sent)
• Format: <Extension flag>,<Nature of address>,<Numbering plan>,
<Number string>
<MLC number> (ISDN address of the Mobile Location Centre)
• Format: <Extension flag>,<Nature of address>,<Numbering plan>,
<Number string>
<Extension flag>
• 0=Extension
• 1=No extension
<Nature of address> (See AddressString definition in 3GPP TS 29.002)
• Valid range: 0–7
<Numbering plan> (See AddressString definition in 3GPP TS 29.002)
• Valid range: 0–15
<Number string> (ISDN address—See AddressString definition in 3GPP TS 29.002)
• Maximum length: 20 characters
• Valid characters: ‘0’–’9’, ‘*’, ‘#’, ‘a’, ‘b’, ‘c’