Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
174 Proprietary and Confidential 2130616
!AVSETPROFILE
Supporting chipsets (voice-
enabled devices only):
• MDM8200A (min f/w rev:
T3_0_1_5)
Note: For MDM6200, MSM6290,
and QSC6270, see !AVSET-
PROFILE on page 151.
Configure and activate profile
Select a profile with which to establish a circuit-switched call. This command also
enables / disables muting on the earpiece and microphone and sets the volume
level.
This setting is stored in non-volatile memory and persists across power cycles.
If desired, you can run the command !AVRXVOLDB on page 172 to assign specific
volume levels to each of the predefined volume levels, 0 through 5.
Usage:
• Execution: AT!SETPROFILE=<profile>, <earmute>, <micmute>, <volume>
Response:
OK
Purpose: Set the audio characteristics for the specified <profile>.
• Query: AT!AVSETPROFILE?
Response:
<earmute>, <micmute>, <volume>
OK
Purpose: Return the audio profile characteristics of the current profile.
Parameters:
<profile> (Voice profiles)
• Valid range: 0–2 (See !AVSETDEV on page 173 for available profiles.)
<earmute> (Enable/disable earpiece muting)
• 0=Unmuted
• 1=Muted
<micmute> (Enable/disable microphone muting)
• 0=Unmuted
• 1=Muted
<volume> (Voice volume level)
• 0=Level 0
• 1=Level 1
• 2=Level 2
• 3=Level 3
• 4=Level 4
• 5=Level 5
Table 8-2: I2S audio command details (Continued)
Command Description