Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
16 Proprietary and Confidential 2130616
Document structure
This document describes the proprietary commands listed in the tables below—
each table corresponds to a specific chapter.
AT Password Commands—Commands used to enable access to password-
protected AT commands and to set the AT command password.
Modem Status, Customization, and Reset Commands—Commands used to
determine modem status, adjust customization settings, and reset the modem.
Table 1-2: AT password commands
Command Description Page
!ENTERCND Enable access to password-protected commands 28
!SETCND Set AT command password 28
Table 1-3: Modem status commands
Command Description Page
!AIN Read analog value from AUXV1 32
!ANTSEL Set/query external antenna select configuration 33
!BAND Select/return frequency band set 34
!BPLMNTIMER Set/return data inactivity timer value 36
!BSHWID Generate frequency on buzzer pin 38
!BSMCCHECK Return modem hardware version 37
!BZBUZZ Generate frequency on buzzer pin 38
!BZBUZZPLAY Generate melody on buzzer pin 39
!CMEN Enable/disable HSPA Compressed Mode stack functionality 39
!CUSTOM Set/return customization settings 40
!CWSETUP Set Connection Watchdog parameters 46
!CWSTATS Query/clear Connection Watchdog statistics 47
!DARPEN Enable/disable DARP for SAIC 47
!DIO Read/write from/to Digital I/O (DIO) channel 48
!DIOCFG Configure DIO channels 49
!DTMEN Enable/disable Dual Transfer Mode stack functionality 51
!EDAEN Configure protocol stack for EDA 52
!EQEN Enable/disable WCDMA L1 equalizer 52
!GCFEN Enable/disable GCF test mode 53
!GCFUIMTYPE Set/return current SIM type 53