Specifications

Voice Commands
Rev. 8 May.12 Proprietary and Confidential 153
!AVTONESETTINGS
Supporting chipsets (voice-
enabled devices only):
• MDM6200
• MSM6290 (min f/w rev:
K1_0_2_25ap, K1_1_1_16ap,
K2_0_6_10ap)
• QSC6270 (min f/w rev: S2.0)
Enable/disable playing of locally-generated DTMF tones
Block locally-generated DTMF tones from playing, while leaving voice unaffected.
The setting is stored in non-volatile memory and persists across power cycles.
Note: This does not block in-band DTMF tones.
Usage:
• Execution: AT!AVTONESETTINGS=<group>,<setting>[,<group>,<setting>][,
...]
Response:
<group 1> TONES: <Off | On>
...
<group N> TONES: <Off | On>
OK
or ERROR
Purpose: Enable or disable local playing of specific tone groups.
• Query: AT!AVTONESETTINGS?
Response:
<group 1> TONES: <Off | On>
...
<group N> TONES: <Off | On>
OK
Purpose: Return the current state for each supported tone group.
• Query list: AT!AVTONESETTINGS=?
Purpose: Return the command format, and supported <group> and
<setting> values.
Parameters:
<group> (Tone group affected)
• ASCII string
• Supported value: “ALL”
<setting> (Enable/disable specified tone group)
• 0=Disable
• 1=Enable
Table 7-5: Voice command details (Continued)
Command Description