Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
118 Proprietary and Confidential 2130616
!DAWSPARANGE
Supporting chipsets:
• All
Note: The modem must be in
FTM mode to use this
command—use
!DAFTMACT
to enter FTM mode.
Set PA range state machine
Set the PA range state machine in WCDMA operation.
Usage:
• Execution: AT!DAWSPARANGE=<PA range>
Response:
<PA range>
OK
Purpose: Set the PA range state machine.
Parameters:
<PA range>
• 0=Low gain state of the PA — Limited to about 16 dBm output power (R0=0,
R1=0)
• 3=High gain state of the PA — Up to the maximum output power of the modem
(R0=1, R1=1)
Note: !DASBAND and !DASCHAN must be issued before you can use
!DAWSPARANGE .
!DAWSSCHAIN
Supporting chipsets:
• All
Enable secondary receive chain (WCDMA only)
Enable or disable the secondary receive chain.
Usage:
• Execution: AT!DAWSSCHAIN=<state>
Response:
OK
Purpose: Enable or disable the secondary receive chain.
Parameters:
<state> (Requested state for secondary receive chain)
• 0=Off (Disable)
• 1=On (Enable)
Note: !DASBAND and !DASCHAN must be issued before you can use !DAWSSCHAIN .
!DAWSCHAINTCM
Supporting chipsets:
• All
Place receive chain in test call mode (WCDMA only)
Place one or both of the primary and secondary receive chains in test call mode.
Usage:
• Execution: AT!DAWSCHAINTCM=<chain>
Response:
OK
Purpose: Place requested receive chain(s) in test call mode.
Parameters:
<chain> (Receive chain to place in test call mode)
• 0=Main
• 1=Secondary
• 2=Both
Note: !DASBAND and !DASCHAN must be issued before you can use
!DAWSCHAINTCM .
Table 5-2: Test command details (Continued)
Command Description