Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
116 Proprietary and Confidential 2130616
!DAWINFO
Supporting chipsets:
• All
Note: The modem must be in
online mode to use this
command.
Return WCDMA mode RF information (WCDMA only)
Return RF information for WCDMA mode when the modem is in CELL_DCH
(Designated Channel) state.
Note: !DAGINFO provides RF information for GSM mode.
Usage:
• Execution: AT!DAWINFO
Response:
RXAGC:<rxAGC> TXAGC:<txAGC> TXADJ:<txAdj>
TXLIM:<txLim> LNA:<lnaRange> PA ON:<paOn>
TX ON:<txOn> PA Range:<paRange>
RxD RXAGC:<RXDrxAGC> RxD LNA:<RXDlnaRange>
HDET:<hdet>
OK
Purpose: Return the RF information.
Parameters:
<rxAGC> (Rx AGC value)
• Valid range: 0–65535
<txAGC> (Tx AGC value)
• Valid range: 0–65535
<txAdj> (Tx AGC value after linearization (adjustment))
• Valid range: 0–65535
<txLim> (Tx AGC limit)
• Valid range: 0–65535
<lnaRange> (State of the LNA)
• Valid range: 0–65535
<paOn> (State of PA_ON0)
• Valid range: 0–65535
<txOn> (State of TX_ON)
• Valid range: 0–65535
<paRange> (State of PA_R1: PA_R0)
• Valid range: 0–65535
<RXDrxAGC> (RxD Rx AGC value)
• Valid range: 0–65535
<RXDlnaRange> (State of the RxD LNA)
• Valid range: 0–65535
<hdet> (Raw HDET (High Power Detector) data)
• HDET information appears for devices using firmware revisions M3.0 Release 1
or higher
• Valid range: 0–255
Table 5-2: Test command details (Continued)
Command Description