Specifications

Test Commands
Rev. 8 May.12 Proprietary and Confidential 109
!DALSTXBW
Supporting chipsets:
• MDM9200 (min f/w rev:
SWI9200M_1.0 Release 5,
or
SWI9200X_3.0 Release 2)
• MDM9600 (min f/w rev:
SWI9600M_01.00.09.04)
Set LTE Tx bandwidth (LTE only)
Set the LTE Tx bandwidth.
Requirements:
• !DASBAND must be issued before you can use this command.
Usage:
• Execution: AT!DALSTXBW=<bw>
Response:
OK
Purpose: Set the LTE Tx bandwidth.
Parameters:
<bw> (LTE bandwidth)
• 0=1.4 MHz
• 1=3 MHz
• 2=5 MHz
• 3=10 MHz
• 4=15 MHz
• 5=20 MHz
!DAOFFLINE
Supporting chipsets:
• All
Place modem offline
Put the modem offline.
Usage:
• Execution: AT!DAOFFLINE
Response:
OK
Purpose: Put the modem offline.
Parameters:
None
Table 5-2: Test command details (Continued)
Command Description