Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
108 Proprietary and Confidential 2130616
!DALGTXAGC
(continued)
Return Tx AGC value and transmitter parameters (LTE only)
(continued)
<mode> (HDET (power detector) mode)
• Valid values:
• L (Lower power)
• H (Higher power)
<padc>
• HDET ADC
<pdbm>
• HDET dBm
<traw> (Raw thermistor ADC value)
• Valid range: 0–4095
<tscaled> (Scaled thermistor value)
• Valid range: 0–255
• Value is scaled from <traw> based on calibrated min/max <traw> values for the
supported temperature range.
<tidx> (Temperature compensation bin)
• Valid range: 0–7
<trem>
• Temperature compensation remainder bin
Note: !DASBAND and !DASCHAN must be issued before you can use !DALGTXAGC .
!DALSRXBW
Supporting chipsets:
• MDM9200 (min f/w rev:
SWI9200M_1.0 Release 5,
or
SWI9200X_3.0 Release 2)
• MDM9600 (min f/w rev:
SWI9600M_01.00.09.04)
Set LTE Rx bandwidth (LTE only)
Set the LTE Rx bandwidth.
Requirements:
• !DASBAND must be issued before you can use this command.
• This command must be issued before you can use !DALGAVGAGC.
Usage:
• Execution: AT!DALSRXBW=<bw>
Response:
OK
Purpose: Set the LTE Rx bandwidth.
Parameters:
<bw> (LTE bandwidth)
• 0=1.4 MHz
• 1=3 MHz
• 2=5 MHz
• 3=10 MHz
• 4=15 MHz
• 5=20 MHz
Table 5-2: Test command details (Continued)
Command Description