Specifications

Test Commands
Rev. 8 May.12 Proprietary and Confidential 107
!DALGTXAGC
Supporting chipsets:
• MDM9200
• MDM9600
Return Tx AGC value and transmitter parameters (LTE only)
Return the Tx AGC (Automatic Gain Control) value and other transmitter parameters.
Note: This command works only in an active call (for example, when connected to a
call box or live network).
Usage:
• Execution: AT!DALGTXAGC or AT!DALGTXAGC?
Response:
Paths: <paths>
Tx<n>:AGC: <agc> dBm RBi: <rbi> RB: <rbn> PA: <pa>
TxGainIdx: <txgi> MTPL: <mtpl> dBm IQgain: <iq>
MPR: <mpr> AMPR: <ampr> NS: <ns>
SARmpr: <sarmpr> PDet Mode: <mode>
PDetAGC: <pagc> PDet: <pdbm> Traw: <traw>
Tscaled: <tscaled> Tidx: <tidx> Trem: <trem>
OK
Purpose: Return transmitter parameters and the transmit <AGC value>.
Parameters:
<paths> (Number of transmit paths)
• 1 (Tx)
<agc> (Tx AGC value in dBm)
• Valid range: -70 to +23
<rbi>
• Start resource block index
<rbn> (Number of resource blocks)
• Valid range: 0–50
<pa> (PA gain state)
• Valid range: 0–3
<txgi>
• Tx gain index
<mtpl> (Max Tx power limit)
• Max value: +23
<iq>
• Digital IQ gain scaling
<mpr> (Maximum power reduction)
• See 3GPP 36.101 for details
<ampr> (Additional Max power reduction)
• See 3GPP 36.101 for details
<ns> (Network Signaled (NS) value)
• See 3GPP 36.101 for details
(Continued on next page)
Table 5-2: Test command details (Continued)
Command Description