Specifications

Test Commands
Rev. 8 May.12 Proprietary and Confidential 105
!DALGAVGAGC
Supporting chipsets:
• MDM9200
• MDM9600
Note: The modem must be in
LTE mode to use this
command.
Return averaged Rx AGC value (LTE only)
Return the averaged AGC (Automatic Gain Control) readings for a specific uplink
channel on the main and diversity paths.
Usage:
• Execution: AT!DALGAVGAGC=<channel>, <LNA Index>
Response:
Paths: <paths>
Rx<n>: AGC: <agc> dBm LNA: <lna> Chain: <chain>
Rx<n>: AGC: <agc> dBm LNA: <lna> Chain: <chain>
OK
Purpose: Return the averaged AGC for <channel> on the main and diversity
paths.
Parameters:
<channel> (Uplink channel number (UARFCN) for the band specified using !DASBAND)
• Valid values depend on the selected band
<LNA Index> (LNA offset index)
• 0=R0 (Highest gain)
• 1=R1
• 2=R2
• 3=R3 (Lowest gain)
<paths> (Number of receive paths)
• 2
<agc> (AGC value in dBm)
• Valid values: Dynamic Rx range
<chain> (Receive paths)
• 0=Rx Main
• 1=Rx Diversity
Note: !DASBAND and !DALSRXBW must be issued before you can use
!DALGAVGAGC .
Table 5-2: Test command details (Continued)
Command Description