Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
102 Proprietary and Confidential 2130616
!DAGSRXBURST
Supporting chipsets:
• All
Note: The modem must be in
FTM mode to use this
command—use
!DAFTMACT
to enter FTM mode.
Set GSM receiver to burst mode
Set the receiver to start or stop sending bursts. The receiver must be in burst mode to
read the RSSI. (The command !DAGGRSSI returns the RSSI value.)
Usage:
• Execution: AT!DAGSRXBURST=<function>
Response:
<function>
OK
Purpose: Set the receiver to burst mode
Parameters:
<function>
• 0=Get RSSI (Burst mode)
• 2=Stop continuous Rx
Note: !DASBAND and !DASCHAN must be issued before you can use
!DAGSRXBURST .
!DAGSRXCONT
Supporting chipsets:
• All
Note: The modem must be in
FTM mode to use this
command—use
!DAFTMACT
to enter FTM mode.
Set GSM receiver continuously on
Set the GSM receiver so that it is continuously on and not bursting.
Usage:
• Execution: AT!DAGSRXCONT=<function>
Response:
<function>
OK
Purpose: Set the receiver to continuously on.
Parameters:
<function>
• 3=Receiver continuously on
• 4=Receiver off
Note: !DASBAND and !DASCHAN must be issued before you can use
!DAGSRXCONT .
Table 5-2: Test command details (Continued)
Command Description