Specifications

AirPrime UMTS / LTE MC/SL-Series Extended AT Command Reference
100 Proprietary and Confidential 2130616
!DAGGRSSI
Supporting chipsets:
• All
Note: The modem must be in
FTM mode to use this
command—use
!DAFTMACT
to enter FTM mode.
Return the RSSI value in dBm (GSM only)
Return the RSSI (Received Signal Strength Indicator) value in dBm using the calibration
offsets (valid in GSM burst mode only—the command !DAGSRXBURST puts the
modem into burst mode).
Usage:
• Execution: AT!DAGGRSSI
Response:
Channel:<chan> LNA:<lna> RXPWR:<pwr> dBm
OK
Purpose: Return the averaged RSSI for the specified channel and LNA offset
index.
Parameters:
<chan> (Channel number for the band specified using !DASBAND)
• Valid values depend on the selected band
<lna> (Current LNA state)
• Valid range: 0–3
<pwr> (RSSI converted to dBm)
• Signed value based on Rx power
Note: !DASBAND and !DASCHAN must be issued before you can use !DAGGRSSI .
!DAGGRSSIRAW
Supporting chipsets:
• All
Note: The modem must be in
FTM mode to use this
command—use
!DAFTMACT
to enter FTM mode.
Return raw RSSI value
Return a 32-bit raw RSSI value (valid in GSM mode only). The value is an average over
multiple bursts.
Usage:
• Execution: AT!DAGGRSSIRAW
Response:
<rssi>
OK
Purpose: Return the raw RSSI value.
Parameters
<rssi> (RSSI, averaged over multiple bursts)
• 32-bit value
Note: !DASBAND and !DASCHAN must be issued before you can use
!DAGGRSSIRAW .
Table 5-2: Test command details (Continued)
Command Description