User guide

Universal Serial Bus (USB)

Rev 3.0D Jul.09 47

Using USB Ethernet with AceManager

InAceManager,usetheUDPorTCPconnectionandenterthe

IPaddressofthemodem(192.168.14.31bydefault)andthe

password(12345bydefault).

Figure 6-15: AceManager : TCP

Using USB Ethernet with a Terminal Emulation Utility

Configureyourterminalapplicationfortelnetcommunication.

a. InHyperTerminal,selectTCP/IP(Winsock)

b. UsetheIPaddressofthemodem(192.168.14.31by

default)asthedestinationandusethetelnetportof

themodem(2332bydefault).

Figure 6-16: HyperTerminal : TCP

c. Enterthemodempassword( 12345bydefault)when

requested.

Using the Virtual Serial Port

Oncethedriverisinstalled,youcanusetheUSBportjustlike

astandardserialport.

192.168.14.31