User guide

Configuration Commands
Rev 3.0D Jul.09 144
• n=3:LogclientandServerevents
Telemetry/Addr List
Modbus,commonlyusedwithtelemetrydevices,allowsa
connectionviaserialporttothemodem.TelemetryandAddr
Listcommandsareonlyusedwhenthemodemisinoneofthe
Modbusstart‐upmodes.Further,TelemetryandtheAddrList
areavailablewithallRavenlinemodemswhichhavea
serial
port,suchastheRavenXandtheRavenXT.TheRavenline
modemUserGuidesexplaininmoredetailhowtousethese
telemetryrelatedcommands.
Figure 1-16: AceManager : Telemetry
IPL=n
IPListDialallowsaccesstheModbusIPlistusingthefirsttwo
digitsofthedialstring.
Example:ATDT1234567wouldgotoID“12”ontheModbus
listandusetheassociatedIPasthedestination.
• n=0:Disabled
• n=1:Enabled
MVLEN=n
ModbusVariantIDLength:LengthoftheRTUIDina
modbus‐variantprotocol,inbytes.
• n=1:Thisparameterisusedtodefinethelengthofthe
RTUIDinModbus‐likeprotocoldatapackets.