User guide

Configuration Commands
Rev 3.0D Jul.09 142
Figure 1-14: AceManager: Port Forwarding
Note: There are no AT commands for Port Forwarding parameters,
they need to be configured using AceManager.
Number of PF Enteries = n
SetvaluetonumberofusedPortforwardrulesforperfor‐
mancegain.Eachforwardingentryhasfourparameters.
• n=1‐5
Public Port = n
PortnumberoftheModem/Gateway.
• n=8090
Host/IF = n
Physicalconnectiontypetothemodem.(USB,Ethernet,
Serial).
•
Host IP = d.d.d.d
IPaddressoftheconnecteddevice/computer.
• d.d.d.d=IPaddress
Private Port = n
Portnumberontheconnecteddevice.