User guide

Raven XT
139 20070914
*TPORT=n
Setsorqueriestheportusedfor theATTelnetserver.If0is
specified,theATTelnetserverwillbedisabled.Thedefault
valueis2332.
• n=0:Disabled.
• n=1‐65535
Tip: Many networks have the ports below 1024 blocked. It is recom-
mended to use a higher numbered port.
*TQUIT
Disconnectsthetelnetsession.NotavailableinAceManager..
Firewall
FirewallModecanlimitaccesstotheRavenXTfromthe
cellularnetworkandtheInternet.BasicFirewallfunctionsare
availableviaAceManager.
Caution: If you are using Firewall mode you will not be able to use
AceManager remotely or Telnet to the modem unless you are
contacting the modem from one of the configured IP addresses.
Note: Firewall mode will only prevent the Raven XT modem from
receiving data from those IP addresses not on the Friends List. It
cannot prevent data, such as pings, from traversing the network to the
modem which may billable traffic even though the modem does not
receive the data.