User guide

Configuration Commands
Rev 3.0D Jul.09 132
*HOSTPRIVMODE=n
Setorquerywhetheraprivateorpublic(network)IPistobe
usedwhentheHostinitiatesa1xconnectiontothemodem.
• n=0:Public(network)IPMode:WhentheHostinitiatesa
PPPconnection,thehostwillbegiventhenetworkIP
addressthatwasobtainedfromthecellularcarrierwhile
registeringonthenetwork.IfthenetworkissuesanewIP
address,thecellularconnectionwillbeclosed(sincethe
IP
addresshaschanged)andhastobere‐initiated.(default).
• n=1:PrivateIPMode:WhentheHostinitiatesa1x
connection,thehostwillbegiventheIPaddressspecified
in*HOSTPRIVIP.Themodemwillthenperform1to1
NAT‐likeaddresstranslation,whichshieldstheHostfrom
networkIPchanges.
*HOSTPW=string
HostPasswordforPAPorCHAP.
• string=password
*HOSTUID=string
HostUserIDforPAPorCHAP.
• string=userid(upto64bytes)
PassThru
PassThruModeisusedtocommunicatedirectlytotheRaven
XTinternalhardware.
Caution: While the modem is in PassThru mode, ALEOS is disabled.
If you need to connect to the Raven XT while it is in PassThru mode,
you will need to do so with a terminal application. Not all commands
are available while the modem is in PassThru mode.
Figure 1-10: AceManager : PassThru