User guide

Configuration Commands
Rev 3.0D Jul.09 128
• n=1:DNSupdatesenabled.
*DNSUSER=d.d.d.d
Setsauser‐providedDNStoqueryfirstwhenperforming
nameresolutionsinthemodem.
• d.d.d.d=IPaddressofdomainserver
Note: You can set up a second DNS User, if you have two DNS
users.
Dynamic IP
ThisgroupincludescommandsspecifictodynamicDNS.
DynamicDNSallowstheRavenXTtouseadynamicIP
addressaccount,withanIPaddressthatcanchangeeachtime
youconnect,andstillallowyoutouseafullyqualifieddomain
nametocontacttheRavenXTusingIPManager
runningona
serverwithadynamicDNSupdater.
Figure 1-8: AceManager : Dynamic IP
*DOMAIN=name
Domain(ordomainzone)ofwhichtheRavenXTisapart.This
valueisusedduringnameresolutionsifafullyqualifiedname
isnotprovidedandalsoforDNSupdates.Thisvaluecan be
upto20characterslong.
• name=domainname(i.e.eairlink.com)
If*DOMAIN=eairlink.com,thenwhenATDT@remote1is
entered,thefullyqualifiednameremote1.eairlink.comwillbe
usedtoperformaDNSquerytoresolvethenametoanIP
address.
Tip: Only letters, numbers, hyphens, and periods can be used in a
domain name.