User guide

Raven XT
123 20070914
• n=0:115200(valeurpardéfaut)
• n=0:38400(valeurpardéfaut)
• n=1:230400
• n=1:115200
ThiscommandisonlyavailablewithCDMA,iDEN,EDGE,or
GPRSmodems.Maynotbeavailableforallmodemmodels.
*NUMTOIP=n
Convert12digitnumbertoIP.
• n=0:Useasname.
• n=1:UseasIPaddress.
*PPPNOCARRIER=n
Providesa“NoCarrier”messagetoadeviceconnectedtothe
serialportusingPPPorCHAPwhenthecellularconnection
becomesunavailable.
• n=0:Disabled(Default).
• n=1:Enabled.
TCP
ThisgroupincludescommandsspecifictoTCPserialcommu‐
nications.
Figure 1-5: AceManager : TCP
S0=n
ThisregisterdetermineshowtheRavenXTrespondstoan
incomingTCPconnectionrequest.TheRavenXTremainsin
ATCommandmodeuntilaconnectionrequestisreceived.
DTRmustbeasserted(S211=1or&D0)andtheRavenXTmust
besetforasuccessfulTCPconnection.TheRavenXTwill
send
a“RING”stringtothehost.A“CONNECT”senttothehost
indicatesacknowledgementoftheconnectionrequestandthe
TCPsessionisestablished.
• n=0:Off(Default).