User guide

Configuration Commands
Rev 3.0D Jul.09 118
Serial
Thisgroupincludescommandsspecifictogeneraluseofthe
serialport.
Figure 1-4: AceManager : Serial
En
ToggleATcommandechomode.
• n=0:EchoOff.
• n=1:EchoOn.
Note: With more than one connection types (serial, and Telnet, and
USB) the echo command can be set differently on each interface.
USB is only available on PinPoint X or Raven XT.
Qn
TheATquiet‐modesetting.Ifquietmodeisset,therewillbe
noresponsestoATcommandsexceptfordataqueried.
• n=0:Off(Default).
• n=1:Quiet‐modeon.
S3=n
Thestandardendoflinecharacterusedtoindicatetheendof
anATcommand.Thischaracterisalsousedas thecarriage
returncharacterforframingresponsesandresultcodesin
commandstate.CannotbeconfiguredinAceManager.