User guide

Configuration Commands
Rev 3.0D Jul.09 116
ATS53=foo.earlink.com
TelnettothespecifiedIPatport12345.
ATS53=192.168.100.23/12345
QuerythespecifiedIPatport12345.
ATS53=/12345
Queryport12345.
Z
ResettheRavenXT.InAceManager,thiscommandis
performedwiththeResetoptiononthetoolbar.
Tip: *DATZ=1 will disable Z.
&W
Writesallchangedmodemsettings.Ifthiscommandisnot
issued,anymodifiedvalueswillrevertbacktotheirprevious
valuesatmodemreset.CannotbeconfiguredinAceManager.
*DATE=[mm/dd/yyyy],[hh:mm:ss]
Setsandqueriestheinternalclock.Eitherthedateandtime
canbespecified,orsi mplyoneofthetwocanbespecifiedin
whichcasetheunspecifiedvaluewillremainunchanged.The
dateandtimearealwaysspecified24‐hournotation.
• mm/dd/yyyy=dateinmonth/day/yearnotation
• hh:mm:ss=timein24‐hournotation
*DPORT=n
ThemodemʹsDevicePortwhichthemodemislisteningonfor
inboundpackets/data/polls.Canalsobesetwiththecommand
S110.
• n=1‐65535
*HOSTPAP=n
UsePAPtorequesttheuserloginandpasswordduringPPP
negotiationonthehostconnection.
• n=0:DisablePAPrequest(Default).
• n=1:TakesuserloginandpasswordfromWindowsDUN
connectionandcopiesto*NETUIDand*NETPW.
*NETALLOWZEROIP=n
AllowsthedisplayedIPaddressin*NETIPtoendinzero(ex.
192.168.1.0).
• n=0:Donotallow.