User guide

Rev 3.0D Jul.09 108
A
A: Configuration Commands
• Info (information)
• Status
• Common
• Logging
• 1x/EV-DO Theconfigurationcommands(ATcommands)inthischapter
arearrangedaccordingtotheirplacementinAceManager.
ThecommandsavailableinAceManagerwilldependofthe
modelnumberofyourRavenXTand,insomecases,the
versionoftheALEOSfirmwareinstalled.
Note: Some commands can only be configured using a terminal
emulation and typed AT commands. Some commands also require
PassThru mode.
Tip: You can use a fully qualified domain name instead of an IP
address for most configuration options calling for an IP address if your
Raven XT is configured to use DNS. DNS settings frequently come
directly from your cellular provider while your Raven XT is registering
on the cellular network and receiving it’s IP address.
Info (information)
Thecommandsinthe“Info”grouphaveread‐onlyparam‐
eters.Theyonlyprovideinformationaboutthemodem.Some
oftheinformationdisplayedinthisgroupdoesnotcorrespond
directlytoATcommands.