User guide

SNMP : Simple Network Management Protocol
Rev 3.0D Jul.09 100
Listening Port
*SNMPPORTsetstheportfortheSNMPagenttolistenon.Ifset
tozero,default,SNMPisdisabled.
Tip: SNMP generally uses port 161, however most Internet providers
(including cellular) block all ports below 1024 as a security measure.
You should be able to use a higher numbered port such as 10161.
Security Level
*SNMPSECLVLsetsthesecuritylevelandwhichversionof
SNMPcommunicationsareused.
• 0‐Nosecurityrequired.SNMPv2candSMNPv3commu‐
nicationsareallowed.
• 1‐Authenticationrequired.SNMPv3isrequiredtodo
authenticationandSNMPv2ctransmissionswillbesilently
discarded.AuthenticationisequivalenttotheauthNoPriv
settinginSNMPv3.
• 2‐Authenticationrequiredandmessagesareencrypted.
SNMPv3isrequiredtodoauthentication.SNMPv2cand
SNMPv3authNoPrivtransmissionswillbesilently
discarded.Authenticationandencryptionisequivalentto
theauthPrivsettinginSNMPv3.
User Name and Password
Theusernameisʹuserʹ.Theusernamecannotbechanged.The
RavenXTʹspasswordisusedastheSNMPpassword(default
isʹ12345ʹ).
Tip: The eight-character password requirement for SMNPv3 is not
enforced by the PinPoint X Agent to allow the default password to
function. Your SNMP administrator or MIS may require you to change
to a more secure and/or longer password.
TochangethepasswordintheRavenXT,selectModemfrom
thetopmenulineinAceManager.